产品分类
联系我们
电话: 0835-554845
传真: 0835-554845
邮箱: dfcwmz@disco-inferno.net
地址: 四川省雅安市
新闻中心

详解气体增压泵的增压比

气体增压泵

Gas booster pump with low pressure gas in large area piston driven and produce high pressure fluid. The small area of the piston end can be used for compressed air and other gases, the output pressure can be adjusted by pressure driven stepless. Here we look at the gas pump pressure ratio:

气体增压泵的增压比实际为驱动活塞与高压活塞(或柱塞)的面积比.气体增压泵的驱动气压要求为0.3-0.8MPa,对于一款增压泵来讲,增压比是固定的,驱动气压0.3-0.8MPa,并不是讲0.3MPa与0.8MPa,增压泵的输出压力是一样的,输出压力是根据驱动气压的变化而变化的,所以在选型时不能只看气体增压泵的最大输出压力,也要看一下工厂的压缩空气的供气状况.

Pressurized gas booster pump than the actual driven piston and the pressure piston (or plunger). The area ratio of gas booster pump driven by pressure requirements for the 0.3-0.8MPa, for a booster pump, the pressure ratio is fixed, the driving pressure of 0.3-0.8MPa, and not about 0.3MPa and 0.8MPa, increase the output pressure of the pump pressure is the same, the output pressure varies according to the change of driving pressure, so not only the maximum output pressure of gas booster pump in the selection, also want to look at the factory of the compressed air supply.

对于想通过计算机进行数据采集和数据分析的客户,我们会为您提供详细的气体增压泵

数据信息.

To collect data and analyze data of the customer through the computer, we will provide gas booster pump detailed data for you.

BACK

版权所有:四川省庆优自吸泵有限公司, All rights reserved

地址:四川省雅安市  电话:0835-554845  邮箱: dfcwmz@disco-inferno.net